Hey guys does anyone know who supplied the three Ralliart exhaust systems???
Original Ralliart Exhaust Manufacturer
Hey guys does anyone know who supplied the three Ralliart exhaust systems???
I’m searching for a rear muffler and tip without much luck so would love to know who originally made themOriginally Posted by mr vrx 3.5
With some degree of confidence, I believe it was Walker/Tenneco.
The following post(s) helps confirm my earlier thoughts.
Originally Posted by TF_ADVAN
...got persuaded by other factors such as build quality since they were taken over by walker. Not saying its crap or anything.https://www.aussiemagna.com/forums/sh...l=1#post134699They are owned by tenneco which also owns Munroe. My brother works there (right next to the
mitsubishi factory).
and:
https://www.aussiemagna.com/forums/sh...=1#post1638488There's only Redback and Walker for ready made bolt on bits, Lukey mufflers need some cuttin' and weldin' I believe.
(All the same company anyway IIRC)
and:
https://www.aussiemagna.com/forums/sh...ll=1#post33185A chance conversation with a work colleague found out that in a previous life he was a mech engineer at Walker and worked on the VRX exhaust.
Unfortunately, with the demise of car manufacturing a few years ago in Adelaide, they have closed the factory:
By Tom FedorowytschTenneco Australia to close Adelaide exhaust plant, 128 jobs lost
Updated 30 Jun 2017, 6:12pm
https://www.abc.net.au/news/2017-06-...-plant/8668486
Last edited by leadfoot6; 07-07-2019 at 12:56 AM.
...
My comments in post #3 apply to the rear muffler.
As far as the Ralliart headers/extractors go, they were made by HM Headers:
https://www.aussiemagna.com/forums/sh...=1#post1013825When Ralliart run the AWD Magnas in Aust Rally Championship they used HM headers. The short primary pipes only reduce low speed torque if the secondary pipes are short. HM have been around a long time and do custom exhaust work for the car makers. When Bathurst was for production cars HM did the headers for all the factory "specials" from Holden, Ford, Chrysler. Originally they were named Head Mod.
Here is an image(taken by someone else here @AMC - not me) of a set of genuine FWD Ralliart extractors with heat shields:
If interested, I have a FWD set of these extractors(without heatshields) and pipework(needs minor repair) available for sale.
PM me if interested.
Last edited by leadfoot6; 07-07-2019 at 01:50 AM.
...
Thank you very much for your reply mate much appreciated ��
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
